Shipyard Industry

In the shipyard industry we deliver tubes and profiles of the lot size 1, but also larger lots.

Therefore is in addition to a rapid tool setup and integration into existing production environments the faultfree production of each batch essential. The optimal use of special materials such as CuNiFe and the execution of high-quality welds is a priority.

Schwarze-Robitec delivers since decades tube bending machines for the shipyard industry. We have fully carried the development of ship-building software with so that we can now offer access to a fully developed programs such as AVEVA Marine (previously Tribon).

In addition, our machines can bent flanged tubes, so that any necessary machine welds can be made on non-bent tubes.

With our experience and extensive references we can produce from simple machines to complete pipe shop or rather a complete workshop equipment.

Produkt range 

Here you will find a selection of our products which are particularly suitable for the tasks of your branches:

 

CNC – free programmable tube bending machines

CNC controlled tube bending machines for rational serial and / or Single manufacturing enable the integration into an existing infrastructures.

Product Max. Output at 450 N/mm2 Max. Output at 750 N/mm2 Max. Modulus in cm3
CNC 40 40,0 x 2,0 32,0 x 1,5 2,2

CNC HD – heavy duty

The most robust machine is designed for continuous use under high demands.

Product Max. Output at 450 N/mm2 Max. Output at 750 N/mm2 Max. Modulus in cm3
CNC 60 HD 60,0 x 5,5 60,0 x 3,2 11,8
CNC 80 HD 89,0 x 7,6 89,0 x 3,2 36,5
CNC 100 HD 114,3 x 8,6 114,3 x 4,0 70,2
CNC 165 HD 168,3 x 11,0 168,3 x 5,0 200,8
CNC 220 HD 219,1 x 12,7 219,1 x 6,3 401,8
CNC 265 HD 273,0 x 15,1 273,0 x 8,8 747,7
CNC 320 HD 323,9 x 17,5 323,9 x 8,8 1224,6
CNC 350 HD 355,0 x 19,1 355,0 x 8,8 1606,7

SR tube bending machines are designed for individual and small production lot sizes.

They are the affordable alternative to our CNC machines and offer an uncomplicated and easy control of up to 99 bending programs.

Product Max. Output at 450 N/mm2 Max. Output at 750 N/mm2 Max. Modulus in cm3
SR 40 40,0 x 2,0 32,0 x 1,5 2,2
SR 60 60,0 x 5,5 60,0 x 3,2 11,8
SR 80 89,0 x 7,6 89,0 x 3,2 36,5
SR 165 168,3 x 11,0 168,3 x 5,0 200,8
SR 220 219,1 x 12,7 219,1 x 6,3 401,8
SR 265 273,0 x 15,1 273,0 x 8,8 747,7
SR 320 323,9 x 17,5 323,9 x 8,8 1224,6
SR 350 355,0 x 19,1 355,0 x 8,8 1606,7
SR 420 419,0 x 21,4 419,0 x 8,8 2528,6