Chemical Industry

In der chemical industry tubes and profiles of the lot size 1, but also larger lots must be processed without damages. A special focus is a high-quality production.

This includes the production of high-quality bends for piggable tubes exactly as the bending work for jacket tubes (also air-gap tubes, duplex or triplex tubes). It may also for cost reasons that the request made ​​to bent flanged tubes. In addition, the chemical industry increasingly use special materials that require specific know-how of the machine manufacturer.

Schwarze-Robitec delivers since decades tubes bending machines for the chemical industry. Our machines meet all relevant international norms and standards for the chemical industry.

Our machines allow the integration into the existing production infrastructure. The construction of our machine allow fast change of the lots.

Tube bending machines from Schwarze-Robitec are able to bent complete and very thin-walled tubes which are made ​​of high strength materials such as titanium with radii up to 1D. Here our machines work without damage and with very low lubrication, so you can reach a cleanly production.

Produkt range 

Here you will find a selection of our products which are particularly suitable for the tasks of your branches:

 

CNC – free programmable tube bending machines

CNC controlled tube bending machines for rational serial and / or Single manufacturing enable the integration into an existing infrastructures.

Product Max. Output at 450 N/mm2 Max. Output at 750 N/mm2 Max. Modulus in cm3
CNC 40 40,0 x 2,0 32,0 x 1,5 2,2

CNC HD – heavy duty

The most robust machine is designed for continuous use under high demands.

Product Max. Output at 450 N/mm2 Max. Output at 750 N/mm2 Max. Modulus in cm3
CNC 60 HD 60,0 x 5,5 60,0 x 3,2 11,8
CNC 80 HD 89,0 x 7,6 89,0 x 3,2 36,5
CNC 100 HD 114,3 x 8,6 114,3 x 4,0 70,2
CNC 165 HD 168,3 x 11,0 168,3 x 5,0 200,8
CNC 220 HD 219,1 x 12,7 219,1 x 6,3 401,8

SR tube bending machines are designed for individual and small production lot sizes.

They are the affordable alternative to our CNC machines and offer an uncomplicated and easy control of up to 99 bending programs.

Product Max. Output at 450 N/mm2 Max. Output at 750 N/mm2 Max. Modulus in cm3
SR 60 60,0 x 5,5 60,0 x 3,2 11,8
SR 80 89,0 x 7,6 89,0 x 3,2 36,5
SR 165 168,3 x 11,0 168,3 x 5,0 200,8
SR 220 219,1 x 12,7 219,1 x 6,3 401,8
SR 265 273,0 x 15,1 273,0 x 8,8 747,7
SR 320 323,9 x 17,5 323,9 x 8,8 1224,6
SR 350 355,0 x 19,1 355,0 x 8,8 1606,7
SR 420 419,0 x 21,4 419,0 x 8,8 2528,6