Automobile industry
The high cost pressures and the need for efficient production chains requires the use of machines that guarantee high availability.
But most of all the machines have to integrate into the existing product chains. With more than 50 years Schwarze-Robitec built tube bending machines for the automobile industry and their suppliers.
Technically our machines are the most economical solution.
They offer the possibility to carry out all steps fully automatic and fully integrated from production to the checking of the components.
Produkt range
Here you will find a selection of our products which are particularly suitable for the tasks of your branches:
CNC – free programmable tube bending machines
CNC controlled tube bending machines for rational serial and / or Single manufacturing enable the integration into an existing infrastructures.
| Product | Max. Output at 450 N/mm2 | Max. Output at 750 N/mm2 | Max. Modulus in cm3 |
|---|---|---|---|
| CNC 25 | 25,0 x 2,0 | 20,0 x 1,5 | 0,8 |
| CNC 40 | 40,0 x 2,0 | 32,0 x 1,5 | 2,2 |
| CNC 50 | 50,0 x 2,0 | 40,0 x 2,0 | 3,5 |
| CNC 60 | 60,0 x 3,0 | 55,0 x 2,0 | 7,3 |
| CNC 80/60 | 70,0 x 3,5 | 65,0 x 2,0 | 11,9 |
| CNC 80 | 90,0 x 2,0 | 75,0 x 2,0 | 11,9 |
| CNC 100/80 | 100,0 x 2,5 | 90,0 x 2,0 | 18,2 |
| CNC 100 | 114,3 x 3,0 | 100,0 x 2,0 | 28,4 |
| CNC 18 | 18,0 x 2,0 | 15,0 x 1,5 | 0,4 |
| CNC 130 | 130,0 x 3,0 | 120,0 x 2,0 | 37,1 |
| CNC 160 | 160,0 x 3,5 | 160,0 x 2,0 | 65,9 |
CNC TWIN – 2 bending heads for complicated tube sytstems
2 bending heads allow to bent counter clockwise and clockwise for the efficient production of complex bent tubes in one operation| Product | Max. Output at 450 N/mm2 | Max. Output at 750 N/mm2 | Max. Modulus in cm3 |
|---|---|---|---|
| CNC 25 TWIN | 25,0 x 2,0 | 20,0 x 1,5 | 0,8 |
| CNC 40 TWIN | 40,0 x 2,0 | 32,0 x 1,5 | 2,2 |
| CNC 60 TWIN | 60,0 x 3,0 | 55,0 x 2,0 | 7,3 |
SR tube bending machines are designed for individual and small production lot sizes.
They are the affordable alternative to our CNC machines and offer an uncomplicated and easy control of up to 99 bending programs.
| Product | Max. Output at 450 N/mm2 | Max. Output at 750 N/mm2 | Max. Modulus in cm3 |
|---|---|---|---|
| SR 40 | 40,0 x 2,0 | 32,0 x 1,5 | 2,2 |
| SR 60 | 60,0 x 5,5 | 60,0 x 3,2 | 11,8 |
| SR 80 | 89,0 x 7,6 | 89,0 x 3,2 | 36,5 |